Intermec 6950 EGS, User Manual

Page: 124 / 144

SECTION 10 Host Application Program
10-10 6950 Enterprise Gateway Server User’s Guide
For help with setting these parameters, see Section 6,
Configuring Radio Frequency Communication."
3.Exit the Comm Setup menu and then press 3" to
configure the RF units (wireless stations).
Modify the IP Host and port information for each
wireless station so it corresponds to the host where
your NORAND Native application resides and the
<portno> in the stream sockets application. Portno"
is the port defined on your host (usually in the services
file) for the wireless stations.
The following shows a setup for one wireless station,
number 42.
nui_cfg--Wire Network Access Server Configuration--Modlvl
<version>
RF Unit Setup:
1. Unit number: 42
3. Comment.....:Native Terminal
5. IP Host name: DEMO
6. Port........: 3325
7. User ID.....:
8. Password ...:
9. Copy setup from unit ???.
10. Duplicate this setup to unit ??? thru unit ???.
CTRL-> Enter option: (E=exit, N=next,P=Previous or item number to change)
HELP->