Intermec 6950 EGS, User Manual

Page: 30 / 144

SECTION 3 Installation
3-14 6950 Enterprise Gateway Server User’s Guide
Cabling
The cable required for the Ethernet connection is a
standard device cable for your network. We sell the cable
for connecting the RC3250 Network Controller's host port
to the 6950 EGS's COM1 port. Its part number is
216Ć772Ć0xx, where xx" indicates the cable length.
Contact your representative for details.
Collecting the Equipment
Before you install the 6950 EGS, collect the equipment you
need. The early model of the 6950 EGS directly connects to
10BASE2 or 10BASEĆT Ethernet medium. The current
model connects to 10BASEĆT or 100BASEĆT.
10BASE2 Components
10BASE2 components include the proper lengths of
10BASE2 coax cable, a TĆconnector, and a cable terminator.
On the early model of the 6950 EGS, the 10BASE2
TĆconnector (Figure 3Ć10 ) attaches to the 6950 EGS's
10BASE2 port, and connects the 6950 EGS to the middle or
end of 10BASE2 cable.
Figure 3Ć10
T-connector