Intermec 6950 EGS, User Manual

Page: 123 / 144

SECTION 10 Host Application Program
6950 Enterprise Gateway Server User’s Guide 10-9
Program interfaces return the wireless station number and
the controller or wireless station response. If one of these
codes is not set, the field contains the number of the
wireless station.
Configuration
You must configure IP, RF communication, and wireless
station parameters to support Native Sockets.
To configure IP and RF communication parameters:
1.For IP setup, see page 5Ć4, Using the IP Menu. "
2.At the Config Menu, press 2" to configure RF
communication. On the Comm Setup menu, do the
following:
"
Set the type to E for an Ethernet connection.
"
Use the same host name configured in the
wireless stations. The host name must be four or
fewer letters and is case sensitive.
"
Set automatic log in to the host.
"
Set the LAN ID.
The following RF communication setup is properly
configured for internet sockets:
Comm Setup
1. Type: E (E,R)
2. Lan: 0 (0–7)
3. Host: HOST
4. Rec: 0 (0,1)
5. Auto: 1 (0,1)
6. Dbg: 0 (0,1)
Option: (1–6,E)