Intermec 6950 EGS, User Manual

Page: 113 / 144

6950 Enterprise Gateway Server User’s Guide 9-1
Section 9
Updating the 6950 EGS Software
" " " " " " " " " " " " " " " " " " " " " " " " " " " "
From time to time we release updates to the 6950 EGS
software. To update the 6950 EGS, you use an update kit
and an external disk drive attached to the 25Ćpin port
marked Service Only."
The update kit is a chargeable item. You may order disks
as part of your software maintenance agreement. Or, you
may order a separate kit with disks and an optional
external disk drive for an additional cost. Without a
software maintenance agreement, you may also order a kit
at a higher cost. Contact your representative for details.
Before you update, record your current network and
wireless settings.
To display your current network settings:
1. At the System Menu, press 1" (Config).
2. At the Config Menu, press 1" (IP).
3. At the IP Menu, press 1" (View).
You must have the information to restore the configuration
after the update. Section 5 has a place to record it.
To display your current wireless settings:
1. At the System Menu, press 1" (Config).
2. At the Config Menu, press 2" (RF Comm).