Intermate100 and Intermate101 Print Server Administration Manual
71
HTTP (Browser): Menu Items and Groups After Login
9.5.
Menu Items and Groups After Login
After a successful login, the “Actions” group with its single
“Login” menu item will be replaced with two main groups of
items:
•
“Actions”
•
“Configurations”—as listed in
“Topics in This Manual”
[page 10]
“Actions”
always give you the chance to “Cancel” or “Con-
firm” on an [<Action>] page before the system carries an action
out. You can use “Actions” for the following things.
•
Reboot There are two kinds of [Reboot], as explained
below, in
“Activating New Values By Rebooting”
[page 73]
.
•
“Print Main Status Pages”. These pages show
configuration, i.e. all currently active settings for all
parameters on the print server (except for certain
configurations for the SCS HPOs).
In addition, the
Main Status Pages
include information
from the
System Log
which is filled from reboot to
reboot.
It is a good idea to document each configuration change by
printing the
Main Status Pages
.
•
Print several different kinds of status pages for 5250
(shown only if the TN5250E HPO is enabled).
•
G22 only: Stop traces started through an FTP
session—depending on which options—TN5250E,
TN3270 and/or IPDS, if any—have been activated.
•
“Restore All Defaults.” This affects every single
parameter, including identifying information, such as IP
address, although some configurations for SCS HPOs
are excepted.
Summary of Contents for Intermate 100
