Intermate100 and Intermate101 Print Server Administration Manual
231
Technical Information: Supported Printers and Performance Features
B.2.
Supported Printers and Performance Features
This print server can attach any printer with a standard or high-
speed IEEE 1284 compliant Centronics parallel port to any place
in your TCP/IP environment.
The performance-related features of the hardware are as
follows:
Intermate100
•
MCF 5307 RISC Processor with 70 MIPS performance
•
8 Mbyte RAM
•
2 Mbyte Flash memory for micro-code.
Intermate101
•
MCF 5307 RISC Processor, 66Mhz
•
32 Mbyte RAM
•
4 Mbyte Flash memory for micro-code.
If you enable the Network Destination Option (NDO), up to four
network printers— attached to the LAN with any kind of print
server you wish—can be made known to the Intermate1xx, thus
making the facilities of one multi-protocol print server available to
up to five different printers. You also have the option of using the
Intermate1xx as a stand-alone, supporting in all up to four differ-
ent printers, all of them network destinations. To use the NDO on a
G22-based print server, you must purchase a key; demo printing
is not possible.
The Intermate1xx retrieves printer status information from a
network printer through SNMP. For this to function properly, a
network target printer must support the status information
nodes defined in the Printer MIB (RFC1759) and some host
information nodes of the Host Resources MIB (RFC1518).
Summary of Contents for Intermate 100
