background image

Intermate100 and Intermate101 Print Server Administration Manual 

2

N

OTICES

Disclaimer 

LCI Intermate A/S makes no warranty of any kind with regard 
to the contents or use of this guide, and specifically disclaims 
any express or implied warranties on merchant ability or fitness 
for any particular purpose.

LCI Intermate A/S shall not be liable for errors contained herein 
or for incidental or consequential damages in connection with 
the performance or use of this product.

Information in this guide is liable to change without notice and 
does not represent a commitment on the part of LCI Intermate 
A/S

Trademarks

Intermate

 is a registered trademark of LCI Intermate A/S.

AFP

AIX

AS/400

IBM

IPDS

LAN Server

OS/2

OS/400

Print Services Facility

PSF

 and 

WIN-OS/2

 are registered 

trademarks of International Business Machines Corporation.

HP Open View 

and 

PCL

 are registered trademarks of Hewlett-

Packard Company.

Windows 95 / 98

Windows NT, 

and

 Windows2000

 and are 

registered trademarks of Microsoft Corporation.

WinZip

®

 is a registered trademark of Nico Mak Computing Inc.

Novell

NDS

NetWare

 and 

NWAdmin

 are registered trade-

marks of Novell, Inc.

Any other trademarks appearing in this document are the prop-
erty of their respective owners.

Summary of Contents for Intermate 100


































































































































































































































































Reviews: