Intermate100 and Intermate101 Print Server Administration Manual
194
Printer and Job Status via “Finger” (External Tool): Purposes and Limitations
27. Printer and Job Status via “Finger”
(External Tool)
27.1.
Purposes and Limitations
With the TCP/UP Finger command you can get the following
information for the system target printer:
•
Interface Type (that is, type of print server)
•
Firmware Version
•
Name (
“Host Name” [page 104]
, not
“Device Name”
[page 107]
)
•
Printer Type
•
Printer Job Status (up to three queued jobs)
•
Printer Status
NDO users must remember that the system target printer can
either be the local printer or a network destination.
The TCP/IP Finger command is supported on Windows NT /
Windows 2000 / Windows XP (as a DOS command) and Unix
systems.
In order to use it, you must be able to ping the Intermate1xx.
If you cannot ping it, you probably need to establish a static IP
route between the management PC and the print server.
Summary of Contents for Intermate 100
