Intermate Intermate 100 Administration Manual Download Page 202

Page: 202 / 257

Intermate100 and Intermate101 Print Server Administration Manual

202

Upgrade Components: Configuration Files

28.4.2. .IDB

The IBM Host Print Options for SCS/TNe operate with collec-
tions of settings known as “IDBs”.

At any one time, the print server’s FTP directory can hold one
TN3270e IDB and up to 8 TN5250e IDBs.

And again, you can use FTP directly or use the

IMCU.

Note

that the

IMCU

can be used to update several print servers at

once - provided that all the servers involved are based on the
same software component and that they all have the same
password.

For detailed information on TN5250E, see the Printing Environ-
ment Guide for IBM OS/400 Systems.

For detailed information on TN3270E, see the Printing Environ-
ment Guide for IBM Main-frame Hosts.

Summary of Contents for Intermate 100


































































































































































































































































Search results

Summary of Contents for Intermate 100

Reviews:

Related manuals for Intermate 100

Brands by name

Popular brands

Intermate Intermate 100, Administration Manual

Search results

Summary of Contents for Intermate 100

Reviews:

Related manuals for Intermate 100

Brands by name

Popular brands