Intermate100 and Intermate101 Print Server Administration Manual
130
Processing Facilities: Data Manipulation in the Logical Printer Layer
Figure 10. SCS TN3270 through “PR0” (Logical Printer 0)
As soon as a logical printer other than PR0 is involved, the
requester must now keep track of three steps, even though it
might not use all three of them.
Figure 11.
shows a job sent off with a service configured to use
a logical printer which uses pre-and post-processing, but no
substitution strings. For this example, we assume that the logi-
cal printer involved is PR5 (as shown in the examples listed in
Figure 8.
).
Print Client
Printer request
system
Logical
Printer
Target Printer
Print Handler
HPO
Emulator
1
PR0
TN3270E
Summary of Contents for Intermate 100
