Intermate100 and Intermate101 Print Server Administration Manual
97
IP Assignments for Initial Contact: Assignment Using DHCP
12.6.
Assignment Using DHCP
1
You must first assign an address statically using ARP and
PING or the
IMCU
, as described in one of the sections
below. When you continue from there, do the following:
2
Connect and Login to the unit with the tool of your choice.
3
Choose [TCP/IP].
a
Disable BOOTP and RARP. Enable DHCP.
b
If it is not possible for Intermate1xx to obtain
the mask from the network, you must type in a
Subnet Mask.
c
If automatic routing (RIP) is not used in your
environment, type in the Default Gateway.
d
Fill out a host name as described on
“Host
Name:” [page 89]
.
4
Save your work and reboot. You can, of course, wait to
reboot until finishing other configurations you want to make.
5
Remember to coordinate things with your network
administrator so that the host name gets registered in an
appropriate DNS table.
Summary of Contents for Intermate 100
