Intermate Intermate 100, Administration Manual

Page: 64 / 257

Intermate100 and Intermate101 Print Server Administration Manual 64
OS/2 2.x and OS/2 Warp: IPDS from PSF/2
8.3. IPDS from PSF/2
This section deals with how to set up PSF/2 which makes it
possible to print IPDS data to a LAN attached printer with an
installed Intermate100 using TCP/IP.
If you need to know how to connect PSF/2 to an IBM host to
receive AFP and IPDS data, please refer to your PSF/2 docu-
mentation,
System requirements
• OS/2 version 2.11 or newer
• DB/2 version 1.0 or newer
• PSF/2 version 1.1 or newer (check with your point of
purchase for recommended CSD levels or contact
support)
• TCP/IP version 2.0 (CSD UN56401) or newer
To create a new printer
1
Start the PSF/2 control panel by selecting PSF/2 Folder >
PSF/2 - Control Panel icon.
2
In the Control Panel select Profile > New. The PSF/2 New
Device dialog box appears.
Enter the "Device Name" and the "Description". Select the
desired IPDS "Device Resolution" (240 dpi or 300 dpi).
Do NOT select a resolution which is not supported. Note
that the default resolution in the Intermate100 is 300 dpi.
3
Select TCP/IP as "Attachment Type" and click on the
"Settings" button. The "TCP/IP Settings" dialog box
appears.
Enter the IP address of the printer. The TCP/IP Port
Number has to be
5001
. Select "OK" and then "Create".
The PSF/2 printer device is now created and is ready to
print from a PSF/2 connected IBM host.
4
In the PSF/2 - Control Panel select the "Options > Setup
Queues". The "Setup Queues" dialog box appears.