Intermate100 and Intermate101 Print Server Administration Manual
36
Windows NT 4.0: Using an Intermate Print Port for Raw Socket or LPR
Print Queue: A default name
PAR_B
is shown. This is a
“binary” queue type which will print to Logical Printer 0. See
“LPR Print Queues (LPD Protocol)” [page 163]
if you need
information on queue types or want to change the queue
name. See
“Services in “Input Control”” [page 159]
if you
need help to understand what Logical Printer 0 is and how
you can choose another alternative.
Port Name: When you click on this field, a name will be
generated according to this syntax:
<print queue name>:<ip address>
You can change this name
11
Finish by clicking ”OK”. This will close the small window and
return you to the Add Printer Wizard.
12
A list of available ports appears next. Note that the new port
has been added to the list (the example below shows an
LPR port). Select it, if it is not already selected.
Click Next.
13
After a bit of a wait, you will be returned to the Add Printer
Wizard, where you will indicate the manufacturer and type
of printer. You may have to take a detour to fetch a type not
already available on the list.
Summary of Contents for Intermate 100
