Intermate100 and Intermate101 Print Server Administration Manual
241
Configuration Checklists: Overall Checklist
Appendix G. Configuration Checklists
G.1.
Overall Checklist
1
Establish contact.
Assign IP address, subnet mask, default gateway.
2
Login. The default password is admin and the password is
admin.
3
Configure the remaining parameters in [TCP/IP]
configuration:
•
Host name is mandatory. Check the syntax guidelines.
•
DNS server is where the Intermate1xx does look-ups
if you enter names instead of IP addresses for various
servers and hosts in other configurations.
•
Registering a WINS server makes your Intermate1xx
known to an NT environment.
4
Configure the [General] settings and [Network] settings.
If you use the NDO in a stand-alone setup (i.e. you do not
want to use a local printer), be sure to change the System
Target Printer from “local” to a network destination.
5
Change the password.
6
Enter your license key if you have purchased one or more
of the available options: Network Destination Option (NDO
- included standard in G-32 based products); Host Print
Option (SCS TNe and/or IPDS).If your point-of-purchase
has already installed a Software Key, it will be written on the
label on the back of the unit.
If you get a key yourself, we recommend that you write it on
the label.
7
Configure one or more target printers (physical printers):
•
Configure the local printer; this is the printer to which
the Intermate1xx is directly attached.
Summary of Contents for Intermate 100
