One-touch patrol
One-touch patrol is an automatically created patrol. The system automatically adds
preset No.1 to No. 32 to the patrol path 8. When the one-touch patrol is called the
camera moves as the patrol path 8 automatically.
To activate one-touch patrol:
1. Set preset No.1 to No. 32. See “Presets” on page 70 for further information.
2. Call preset No. 45, and the camera moves as patrol path 8.
3. Click
to enter the patrol settings interface and start/stop one-touch patrol, and
edit the patrol time and the speed.
4. Click
on the PTZ control panel to start one-touch patrol.
Patterns
A pattern is a memorized series of pan, tilt, zoom, and preset functions. A pattern can
be called using the pattern settings interface. There are up to four patterns that can be
customized.
Note:
Pattern functions vary depending on camera model.
To set a pattern:
1. In the PTZ control panel, click
to enter the pattern settings interface.
2. Select a pattern number from the list.
3. Click
to enable recording the panning, tilting, and zooming actions.
4. Use the PTZ directional buttons to move the camera to the required position after
the PROGRAM PATTERN REMAINING MEMORY(%) information appears on the
screen.
5. Click
to save all the pattern settings.
Note:
The four patterns can be operated separately and with no priority level.
When configuring and calling the pattern, the proportional pan is valid, the limit
stops and auto flip will be invalid, and the 3D positioning operation is not supported.
TruVision Stainless Steel PTZ Camera Configuration Manual
73
