Note:
The OSD (On Screen Display) menu may need to be used when controlling the
camera remotely. To display the OSD menu on the live view screen, call the preset
number 95.
Patrols
A patrol is a memorized series of preset functions. The camera stays at a step for a set
dwell time before moving on to the next step. The steps are defined by presets. A patrol
can be configured with up to 32 presets.
You can configure up to eight patrols.
To set a patrol:
1. In the PTZ control panel, click
to enter the patrol settings interface.
2. Select a patrol number from the list.
3. Click
to enter the adding interface of the preset.
4. Configure the preset number, patrol time, and patrol speed.
Patrol Duration:
The dwell time. The length of time in seconds for which a
camera stays at a preset before moving to the next preset.
Patrol Speed:
The speed the camera moves from one preset to another.
5. Click
OK
to save a preset into the patrol.
6. Repeat the steps from 3 to 5 to add more presets.
7. Click
OK
to save all the patrol settings.
To call a patrol:
In the PTZ control panel, select a defined patrol from the list and click to call the
patrol.
72
TruVision Stainless Steel PTZ Camera Configuration Manual
