2. Select
Enable Timing Snapshot
to enable continuous snapshots.
3. Select the file format for the snapshot from the
Format
drop-down list.
4. Select the resolution and quality of the snapshot from the
Resolution
and
Quality
drop-down lists.
5. Enter the time interval between two snapshots. Select the unit of time from the drop-
down list:
millisecond
,
second
,
minute
,
hour
, or
day
.
6. Click
Save
to save changes.
To set up event-triggered snapshots:
1. From the menu toolbar, click
Configuration
>
Storage
>
Schedule Settings
>
Capture
>
Capture Parameters
.
2. Check
Enable Event-triggered Snapshot
to enable event-triggered snapshots.
3. Select the file format for the snapshot from the
Format
drop-down list.
4. Select the resolution and quality of the snapshot from the
Resolution
and
Quality
drop-down lists.
5. Enter the time interval between two snapshots. Select the unit of time from the drop-
down list:
millisecond
,
second
,
minute
,
hour
, or
day
.
6. Under
Capture Number
, enter the total number of snapshots required.
7. Click
Save
to save changes.
Storage management
Use the storage management window to display the capacity, free space available, and
the working status of NAS hard drives and the SD card in the camera. These storage
devices can also be formatted in the
Storage Management
window.
Before formatting the storage device, stop all recording. Reboot the camera after
formatting is complete, otherwise the device will not function properly.
If
Overwrite
is selected, the oldest files are overwritten when the storage becomes full.
TruVision Stainless Steel PTZ Camera Configuration Manual
53
