Network settings
Accessing the camera through a network requires the definition of certain network
settings. Use the Network menu to define these settings.
Basic settings
Menu tabs
Description
1.
TCP/IP
NIC Type
: Select the NIC type from the drop-down list. Default is
Auto
.
Other options include
10M Half-dup
,
10M Full-dup
,
100M Half-dup
, and
100M Full-dup
.
DHCP
: Select
DHCP
to automatically obtain an IP address and other
network settings from that server.
IPv4 Address
: If necessary, type in the IPv4 address of the camera.
IPv4 Subnet Mask
: If necessary, type in the IPv4 subnet mask.
IPv4 Default Gateway
: If necessary, type in the IPv4 gateway IP address.
IPv6 Mode
: Select
Manual
,
DHCP
, or
Router Advertisement
from the
drop-down list.
IPv6 Address
: Type in the IPv6 address of the camera.
IPv6 Subnet Mask
: Type in the IPv6 subnet mask.
IPv6 Default Gateway
: Type in the IPv6 gateway IP address.
Mac Address
: If necessary, type in the MAC address of the devices.
MTU
: Type in the valid value range of MTU. Default is 1500.
Multicast Address
: Enter a D-class IP address between 224.0.0.0 to
239.255.255.255. Only specify this option if using the multicast function.
Some routers prohibit the use of multicast function in case of a network
storm.
Enable Multicast Discovery
: Enables the automatic detection of the
TruVision Stainless Steel PTZ Camera Configuration Manual
13
