6. Set the date and time differential of the DST period using the
Start Time
,
End
Time
, and
DST Bias
drop-down lists.
7. Click
Save
to save changes.
RS485
The RS-485 serial port is used to control the PTZ of the camera or connect to light and
wiper devices. Configuration of these parameters should be done before you connect to
any devices.
To set up RS-485 settings:
1. From the menu toolbar, click
Configuration
>
System
>
System Settings
>
RS485
.
2. Select the RS-485 port parameters.
Note:
The Baud Rate, PTZ Protocol, and PTZ Address parameters should be
exactly the same as the PTZ camera parameters.
3. Click
Save
to save changes.
12
TruVision Stainless Steel PTZ Camera Configuration Manual
