6. Select an option from the
Detection Target
drop-down list to set the target type that
can trigger an alarm. Options are
All
,
Human
, and
Vehicle
.
7. Click
Save
to save changes.
8. Click the
Arming Schedule
tab to edit the arming schedule. Click and drag along
the time bars or click on a time bar to configure arming schedule times.
Note:
All scheduled times are based on the 24-hour clock. Ensure that the correct
time zone and daylight saving time settings have been configured in
Configuration
>
System
>
System Settings
.
9. Click
to copy the schedule to other days by selecting the corresponding check
box next to the day.
10. Click
Save
to save changes.
11. Click the
Actions
tab to specify the linkage method for when an event occurs.
Select one or more response methods for the system when an alarm is triggered.
See “Linkage methods” on page 37 for details.
12. Click
Save
to save changes.
Cross line detection
This function can be used to detect people, vehicles, and objects crossing a pre-defined
line or an area on-screen. The line crossing direction can be set as unidirectional or bi-
directional. Unidirectional is crossing the line from left to right or from right to left. Bi-
directional is crossing the line from both directions.
A series of linkage methods can be triggered if an object is detected crossing the line.
To define cross line detection:
1. From the menu toolbar, click
Configuration
>
Event
>
Smart Event
>
Line
Crossing Detection
.
2. Select the
Enable
check box to enable the function.
TruVision Stainless Steel PTZ Camera Configuration Manual
47
