4. Click
Save
to save changes.
To set up the NAT parameters:
Network Address Translation (NAT) permits automatic communication with a network
router.
1. Click
Configuration
>
Network
>
Basic Settings
>
NAT
.
2. Select the
Enable UPnP
check box to enable the NAT function.
3. Select
Auto
or
Manual
from the
Port Mapping Mode
drop-down list. When
Manual
is selected, click on an external port number to change it by typing in a new port
number.
Note:
If a non-default external port number is assigned, the network router settings
must be configured accordingly.
4. Click
Save
to save changes.
Advanced settings
Menu tabs
Description
1.
SNMP
SNMP is a protocol for managing devices on networks. Enable SNMP to
get camera status and parameter related information. See page 17 for
setup information.
16
TruVision Stainless Steel PTZ Camera Configuration Manual
