Interlogix TruVision TVP-5201, Configuration Manual

Page: 51 / 79

When drawing the rectangle, connect all lines end-to-end to each other. Up to four
areas are supported. Click
Clear to clear the areas drawn. The defense region
parameters can be set up separately.
Note : The drawn area can only be quadrilateral.
5. Select an option from the Detection Target drop-down list to set the target type that
can trigger an alarm. Options are All , Human , and Vehicle .
6. Click Save to save changes.
7. Click the Arming Schedule tab to edit the arming schedule. Click and drag along
the time bars or click on a time bar to configure arming schedule times.
Note: All scheduled times are based on the 24-hour clock. Ensure that the correct
time zone and daylight saving time settings have been configured in Configuration
> System > System Settings .
8. Click
to copy the schedule to other days by selecting the corresponding check
box next to the day.
9. Click Save to save changes.
10. Click the Actions tab to specify the linkage method for when an event occurs.
Select one or more response methods for the system when an alarm is triggered.
See “Linkage methods” on page 37 for details.
11. Click Save to save changes.
Region Exiting Detection
This function can be used to detect people, vehicles, and objects exiting a pre-defined
area on-screen.
To define region exiting detection:
1. From the menu toolbar, click Configuration > Event > Smart Event > Region
Exiting Detection .
2. Select the Enable check box to enable the function.
3. Select the region number to be configured from the Region drop-down list.
4. Click Draw Area , and then draw a rectangle on the image as the defense region.
When drawing the rectangle, connect all lines end-to-end to each other. Up to four
areas are supported. Click
Clear to clear the areas drawn. The defense region
parameters can be set up separately.
Note : The drawn area can only be quadrilateral.
5. Select an option from the Detection Target drop-down list to set the target type that
can trigger an alarm. Options are All , Human , and Vehicle .
6. Click Save to save changes.
7. Click the Arming Schedule tab to edit the arming schedule. Click and drag along
the time bars or click on a time bar to configure arming schedule times.
TruVision Stainless Steel PTZ Camera Configuration Manual 49