MP73P+ : Battery charger/analyser
Operators Manual
•
If the name entered is the same as an existing library entry the parameters
for the existing entry will be used to be modified.
•
The charge parameters will then be requested.
•
Followed by the capacity test parameters.
•
Once the parameters have been entered the library entry will be shown in
the library list.
•
Note the new entry will be inserted after the last valid library entry.
•
Press
‘CLR’
repeatedly to return to the main screen.
8.1
Data Entry Procedure
When creating or modifying a library entry, or entering manual battery data for a one
off charge or discharge the unit will prompt for necessary values for each charge or
discharge mode selected.
When entering data the
‘CLR’
will backspace any wrongly entered values. If the data
field is empty (i.e. cursor in first location) the whole data entry process will be aborted
and the charger will take you back to to the
MAIN
page.
8.2 Entering Charge Data
From the
MAIN
screen by selecting
CHARGE
->
MANUAL
From the
MAIN
screen by selecting
CHARGE
->
LIBRARY
->
->
MODIFY
From the
MAIN
screen by selecting
PROCESS
->
PROCESS #
->
VIEW/EDIT
->
MODIFY
->
CHARGE BATTERY
.
The screen will request
CHARGE TYPE
.
Select
>> NEXT >>
or
<< PREV <<
to change to either : -
CONSTANT VOLTAGE CHARGE
CONSTANT CURRENT CHARGE
MULTI-STEP CHARGE
CELL MONITOR CC CHARGE
Doc: DWG1042-12-R18 MB73P+ Operators manual.odt
Page 40 of 64
Copyright Material of Intelligent Charging Limited © 2020
Printed On : 29/11/20
