Intel SRCU31, User Manual

Page: 60 / 182

60 Intel RAID SRCU31 Users Guide
Installation of Intel RAID Controller SRCU31 StorCon
Monitoring Utility
Installation of StorCon from the Intel RAID Controller SRCU31
CD-ROM
1. If you are installing the StorCon from the Intel RAID Controller SRCU31 CD-ROM, then place
the Intel RAID Controller SRCU31 CD-ROM in the CD-ROM drive and mount the CD-ROM:
$ mount /dev/cdrom /mnt/cdrom
2. Copy the StorCon utility archive to /usr/sbin:
$ cp /mnt/cdrom/linux/install/storcon-2.02.gz /usr/bin/storcon-2.02.gz
3. Unpack the archive file and rename:
$ gunzip -d /usr/sbin/storcon-2.02.gz
$ mv /usr/sbin/storcon-2.02 /usr/sbin/storcon
Using StorCon Monitoring Utility
To run the StorCon utility, type “storcon” at any prompt. Select the interface (Linux if locally run,
TCP/IP sockets if remote).
While using StorCon from the Linux system console, the StorCon screen may be overwritten by
system/kernel log messages. To avoid this, execute the following command (entered at the prompt
from a console session):
dmesg -n 1
When finished using StorCon, the console log level can be set back to the default level using the
following command:
dmesg -n 7
This behavior is not observed if the StorCon utility is used from an X-windows terminal window.