Intel SR1600UR - Server System - 0 MB RAM, Service Manual

Page: 76 / 190

58 Intel
®
Server System SR1600UR Service Guide
Figure 44. Installing the Small Air Baffle
For information about cabling around the air baffle, see “Cable Routing” on page 30 .
Installing and Removing a Fixed Mount Hard Drive
(Fixed Mount Hard Drive System Only)
Caution: Fixed mount hard drives are NOT hot-swappable. Before removing or replacing the drive,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.
You can install up to three fixed SATA hard drives in the Intel
®
Server System SR1600UR
(Product Code: SR1600UR).
Note: For a web link to a list of supported hardware, see “Additional Information and
Software” on page 3 .
Note: The fixed mount hard drives can be extracted only by accessing the drive carrier latch
from inside the chassis.
Installing a Fixed Mount Hard Disk Drive
To install a fixed mount hard disk drive, follow these steps:
1. Release the fixed mount drive carrier from the drive bay by pressing the blue carrier
latch (from inside the chassis) at the end of the black drive rail (see letter “A” in
Figure 45 ) and pushing it forward.
AF002 88 6