Intel SR1600UR - Server System - 0 MB RAM, Service Manual

Page: 91 / 190

Intel
®
Server System SR1600UR Service Guide 73
Note: Cable connectors are keyed and can only go in one way.
Figure 63. Connecting the Intel
®
RMM3 cable
6. Connect the opposite end of the cable to the RMM3 connector on the server board
(see letter “A” in Figure 64 ).
7. Attach the module bracket to the chassis with two screws (see letter “B” in
Figure 64 ).
Note: The screws install from the back of the chassis.
Figure 64. Installing the Intel
®
RMM3 to the Server System
8. Install the processor air duct. For instructions, see “Installing the Processor Air
Duct” on page 47 .
9. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 42 .
Bottom
AF002949
B
RMM3
Connector
A
RMM3 Module
AF002 8 57