Intel SR1600UR - Server System - 0 MB RAM, Service Manual

Page: 74 / 190

56 Intel
®
Server System SR1600UR Service Guide
Figure 42. Removing the Heatsink
Removing the Processor
To remove the processor, follow these steps:
1. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 41 .
2. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” on page 46 .
3. Remove the heatsink. For instructions, see “Removing the Heatsink” on page 55 .
4. Unplug the processor fan cable from the server board.
5. Open the processor socket lever (see
Figure 35 ).
6. Open the CPU load plate (see Figure 36 ).
7. Remove the processor.
8. If installing a replacement processor, see
“Installing the Processor” on page 50 for
instructions. Otherwise, install the protective socket cover over the empty processor
socket.
A
B
TIM
This Side Up
Discard to Install CPU
This Side
Up
Discard to In
stall CPU
2
3
1
4
C