Intel SR1600UR - Server System - 0 MB RAM, Service Manual

Page: 104 / 190

86 Intel
®
Server System SR1600UR Service Guide
Figure 75. Installing the Server Board
3. Connect all the power cables coming from the power supply to the server board.
4. Install memory. For instructions, see
“Installing DIMMs” on page 48 .
5. Install processor(s). For instructions, see “Installing the Processor” on page 50
6. Install processor heatsink(s). For instructions, see “Installing the Heatsink” on
page 53 .
7. Install the system fan assembly. For instructions, see “Installing the System Fan
Assembly” on page 92 .
8. Hot-swap hard drive systems only: Install the bridge board. For instructions, see
step 7 in “Installing the Backplane Board” on page 78 .
9. Hot-swap hard drive systems with passive backplane only: Connect the hard
drive SATA cables from the backplane to the server board.
10. Install the blue air baffle. For instructions, see “Installing the Small Air Baffle” on
page 57 .
11. If necessary, install the I/O expansion module. For instructions, see “Installing the
I/O Expansion Module” on page 69 .
B
A
AF002914