Intel SR1600UR - Server System - 0 MB RAM, Service Manual

Page: 86 / 190

68 Intel
®
Server System SR1600UR Service Guide
Figure 58. Removing the Slimline Optical Drive from the Tray
Filling Empty Server System Bays
You must install either a filler panel, drive blank, or empty drive carrier into an empty
drive bay. To access the drive bays, remove the front bezel if it is installed. For
instructions, see “Removing the Front Bezel” on page 38 .
With the bezel removed, install the appropriate panel(s), blank, or empty hard drive bay(s)
as follows:
•
If you do not have an optical drive or floppy drive installed in the slimline bay,
install the slimline filler panel.
•
If you do not have a hard drive installed, install the drive blank into the hard drive
carrier.
•
Install empty hard drive carriers into any remaining empty hard drive bays.
C
Metal Tab
B
AF002 8 93
A