Intel SR1600UR - Server System - 0 MB RAM, Service Manual

Page: 68 / 190

50 Intel
®
Server System SR1600UR Service Guide
Removing DIMMs
To remove a DIMM, follow these steps:
1. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 41 .
2. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” on page 46 .
3. Locate the DIMM sockets (see Figure 34 ).
4. Gently spread the retaining clips at each end of the socket. The DIMM lifts from
the socket.
5. Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static
package.
Installing and Removing the Processor
Caution: Processor must be appropriate: You may damage the server board if you install a
processor that is inappropriate for your server. See “Additional Information and
Software” on page 3 for a web link to the list of compatible processor(s).
Caution: ESD and handling processors: Reduce the risk of electrostatic discharge (ESD) damage to
the processor by doing the following: (1) Touch the metal chassis before touching the
processor or server board. Keep part of your body in contact with the metal chassis to
dissipate the static charge while handling the processor. (2) Avoid moving around
unnecessarily.
Caution: Protective socket cover needs to be removed for proper cooling of the processor; failure to
remove the cover could result in damage to the system.
Installing the Processor
To install a processor, follow these instructions:
1. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 41 .
2. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” on page 46 .
3. Remove the heatsink, if installed. For instructions, see “Removing the Heatsink” on
page 55 .
4. Locate the processor socket.
5. Push the lever handle down and away from the socket to release it (see letter “A” in
Figure 35 ).
6. Rotate the lever open all the way (see letter “B” in Figure 35 ).