Intel PXA270 Optimization Manual Download Page 132

Page: 132 / 144

Glossary-8

Intel® PXA27x Processor Family

Optimization Guide

Little endian

Method of storing data that places the least significant byte of multiple-byte values at lower storage

addresses. For example, a 16-bit integer stored in little endian format places the least significant byte at the lower

address and the most significant byte at the next address.

LOA

Loss of bus activity characterized by an SOP without a corresponding EOP.

Low-speed

USB operation at 1.5 Mb/s. See also full-speed and high-speed.

LSb

Least significant bit.

LSB

Least significant byte.

LVDS

Low-voltage differential signal

MAC

Multiply Accumulate unit

Mb/s

Transmission rate expressed in megabits per second.

MB/s

Transmission rate expressed in megabytes per second.

Media Center. A combination digital set-top box, video and music jukebox, personal video recorder and an

Internet gateway and firewall that hooks up to a broadband connection.

Message Pipe

A bidirectional pipe that transfers data using a request/data/status paradigm. The data has an

imposed structure that allows requests to be reliably identified and communicated.

Microframe

A 125 microsecond time base established on high-speed buses.

MMC

Multimedia Card - small form factor memory and I/O card

MMX Technology

The Intel® MMX™ technology comprises a set of instructions that are designed to greatly

enhance the performance of advanced media and communications applications. See chapter 10 of the

Intel

Architecture Software Developers Manual, Volume 3: System Programming Guid

e, Order #245472.

Mobile Station

Cellular Telephone handset

M-PSK

multilevel phase shift keying. A convention for encoding digital data in which there are multiple states.

MMU

Memory Management Unit, part of the Intel XScale®core.

MSb

Most significant bit.

MSB

Most significant byte.

MSL

Mobile Scalable Link.

NAK

Handshake packet indicating a negative acknowledgment.

Non Return to Zero Invert

(NRZI) A method of encoding serial data in which ones and zeroes are represented by

opposite and alternating high and low voltages where there is no return to zero (reference) voltage between encoded

bits. Eliminates the need for clock pulses.

NRZI

See Non Return to Zero Invert.

Object

Host software or data structure representing a USB entity.

OFDM

See Orthogonal Frequency Division Multiplexing.

Summary of Contents for PXA270

















































































































































Search results

Summary of Contents for PXA270

Reviews:

Related manuals for PXA270

Brands by name

Popular brands

Intel PXA270, Optimization Manual

Search results

Summary of Contents for PXA270

Reviews:

Related manuals for PXA270

Brands by name

Popular brands