Intel ISP4400 - Server Platform - 0 MB RAM, Product Manual

Page: 77 / 114

Solving Problems 77
q
Verify that the baseboard jumpers are set correctly. See the SKA4 Baseboard Product Guide
for more information.
q
If other software runs correctly on the system, contact your vendor about the failing software.
If the problem persists, contact the software vendor’s customer service representative for
assistance.
Bootable CD-ROM Is Not Detected
Check the following:
q
Is the BIOS set to allow the CD-ROM to be the first bootable device?
Error and Informational Messages
When you turn on the system, POST displays messages that provide information about the system.
If a failure occurs, POST emits beep codes that indicate errors in hardware, software, or firmware.
If POST can display a message on the video display screen, it causes the speaker to beep twice as
the message appears.
POST Codes and Countdown Codes
Table 5. Standard BIOS Port-80 Codes
CP Beeps Reason
Xx 1-1-1-1 There are no processors present in the system, or the processors are so
incompatible that the system BIOS cannot be run (like mismatched cache voltages)
16 1-2-2-3 BIOS ROM checksum
20 1-3-1-1 Test DRAM refresh
22 1-3-1-3 Test 8742 Keyboard Controller
28 1-3-3-1 Autosize DRAM, system BIOS stops execution here if the BIOS does not detect
any usable memory DIMMs
2C 1-3-4-1 Base RAM failure, BIOS stops execution here if entire memory is bad
46 2-1-2-3 Check ROM copyright notice
58 2-2-3-1 Test for unexpected interrupts
98 1-2 Search for option ROMs. One long, two short beeps on checksum failure
B4 1 One short beep before boot
Table 6. Recovery BIOS Port-80 Codes
CP Beeps Reason
Xx 1-1-1-1 There are no processors present in the system, or the processors are so
incompatible that the system BIOS cannot be run (like mismatched cache voltages).