Intel ISP4400 - Server Platform - 0 MB RAM, Product Manual

Page: 87 / 114

Technical Reference 87
AC Power Input
A single IEC320-C13 receptacle is provided at the rear of the server. It is recommended to use an
appropriately sized power cord and AC main.
Peripheral Adapter Boards and Connectors
The peripheral adapter boards convert the 50 pin JAE and FFC signal interface connectors of the
½-inch slim line peripherals to a standard 40 pin IDE and 34 pin floppy cable pin-outs. Two
unique boards are required, one for the floppy and one for the CD-ROM.
CD-ROM Connectors
The 40-pin connector for the CD-ROM adapter board is the standard IDE pin-out, as shown in the
table below.
Table 17. CD-ROM Adapter Board 40 Position
IDE Connector
Pin Signal Pin Signal
1 RSTDRV 2 GROUND
3 DD7 4 DD8
5 DD6 6 DD9
7 DD5 8 DD10
9 DD4 10 DD1
11 DD3 12 DD12
13 DD2 14 DD13
15 DD1 16 DD14
17 DD0 18 DD15
19 GROUND 20 KEY PIN
21 DRQ 22 GROUND
23 DIOW 24 GROUND
25 DIOR 26 GROUND
27 IORDY 28 CSEL
29 DACK 30 GROUND
31 IRQ 32 NC
33 DA1 34 NC
35 DA0 36 DA2
37 CS1P_L 38 DS3P_L
39 DHACT_L 40 GROUND
Table 18. CD-ROM Adapter Board Power Connector
Pin Signal
1 GND
2 +5 Power