Intel ISP4400 - Server Platform - 0 MB RAM, Product Manual, Page: 37 / 114

A Detailed Description of Chassis Features 37
Table 4. Chassis Feature Summary
Feature Description
A. Peripheral Bay A peripheral bay in the front of the system has a 5.25-inch device bay and a
configurable media bay.
A1. Peripheral Bay:
Device Bay
The device bay can hold a 5.25-inch CD-ROM or DAT device.
A2. Peripheral Bay:
Configurable
Media Bay
Either :
1.44 MB, 3.5-inch diskette drive, accessible from the front after removing the bezel.
Or :
.5-inch slim-line floppy drive and a .5-inch slim-line CD-ROM drive.
B. Hard Drives The hard drive bay supports either five 1.0-inch or three 1.6-inch hot-swap Adaptec
Ultra 160/m SCSI hard drives. Hard drives are not installed as part of the system.
If the operating system supports hot-swapping of hard drives, these drives can be
changed without shutting down the server.
C. Power Subsystem Installed:
A power subsystem bay that supports up to three 350-watt power supply modules in
a (2+1) redundant configuration.
The power subsystem bay is mounted at the front-left corner of the chassis and is
shipped with either one or three power supply modules.
A cover plate for any empty power supply location is supplied for a system that does
not have redundancy.
If more than one supply is installed, each power supply can be changed without
shutting down the server.
D. Cooling Installed:
Fan board assembly and six fans in a redundant (5+1) fan array or three fans in a
non-redundant (3+0) fan array. The fans cool the baseboard and other
components.
In a 5+1 configuration, a failed fan may be removed and installed without shutting
down the server. This process is called hot-swapping. Hot-swapping fans can only
be performed by a qualified service technician.
continued