Intel ISP4400 - Server Platform - 0 MB RAM, Product Manual

Page: 57 / 114

Removing and Installing System Components 57
18. Install the memory board. See the SKA4 Baseboard Product Guide for instructions.
19. Install the memory retention bar. See "Installing the Memory Retention Bar" on page 52.
20. Install the fan board assembly. See "Installing a Fan Board Assembly" on page 63.
21. Place the foam cover over the E-Bay.
22. Install the top cover. See "Installing the Top Cover" on page 51.
23. Install the front cover. See "Installing the Front Cover" on page 51.
24. Connect all peripheral cables to the I/O panel on the back of the system.
Accessing Baseboard Components
If you are working with SKA4 baseboard components, turn off the system by using the power
on/off switch on the front panel AND unplug all AC power cords. Expose the SKA4 baseboard by
removing the front cover, top cover, foam cover, and retention memory bar. For instructions on
removing the front cover, see "Removing the Front Cover" on page 50. For instructions on
removing the top cover, see "Removing the Top Cover" on page 51. For instructions on removing
the memory retention bar, see "Removing the Memory Retention Bar" on page 52.
After you are finished working with baseboard components, install the foam cover, the top cover,
and the front cover. For instructions on installing the front cover, see "Installing the Front Cover"
on page 51. For instructions on installing the top cover, see "Installing the Top Cover" on page 51.
For instructions on installing the memory retention bar, see "Installing the Memory Retention Bar"
on page 52.
Finally, boot the server system so that the hardware changes you made are recognized by the
SRKA4 MP Server System.
✏
NOTE
Hot-plug PCI add-in boards: If only removing and/or installing hot-plug
PCI add-in boards, do not turn off the system. However, you must turn off
the power to any hot-plug PCI add-in board slot that needs servicing. This is
typically handled through a Graphical User Interface (GUI) or through the
operating system. For more information on exchanging hot-plug PCI add-in
boards, see "Hot-plug PCI Add in Boards" on page 29.
For more information about accessing baseboard components other than hot-plug PCI add-in
boards, refer to the SKA4 Baseboard Product Guide.