Intel D815EEA2 Product Manual Download | Manualshive

Page: 92 / 96

background image

Intel Desktop Boards D815EEA2, D815EPEA2, D815EFV, and D815EPFV Product Guide

92

Product Certification Markings

The desktop boards have the following product certification markings:

•

UL joint US/Canada Recognized Component mark: consists of small c followed by a stylized
backward UR and followed by a small US. Includes adjacent UL file number for Intel desktop
boards: E210882 (component side).

•

FCC Declaration of Conformity logo mark for Class B equipment; includes Intel name and
model designation (solder side).

•

CE mark: declaring compliance to European Union (EU) EMC directive (89/336/EEC) and
Low Voltage directive (73/23/EEC) (component side).

•

Australian Communications Authority (ACA) C-Tick mark: consists of a stylized C overlaid
with a check (tick) mark (component side), followed by Intel supplier code number, N-232.

•

Printed wiring board manufacturer’s recognition mark: consists of a unique UL recognized
manufacturer’s logo, along with a flammability rating (94V-0) (solder side).

•

PB part number: Intel bare circuit board part number (solder side):



A45133-007 (for D815EEA2 and D815EPEA2 boards)



A44507-007 (for D815EFV and D815EPFV boards)

Also includes SKU number starting with AA followed by additional alphanumeric characters.

•

Battery “+ Side Up” marking: located on the component side of the board in close proximity
to the battery holder.

•

Korean MIC logo mark: denotes Korean EMC certification (component side). Additional
certification information is provided below:
1. Product Name (model)
2. Certificate

ID

3. Applicant: Intel Korea Ltd.

4. Date of manufacture as separate marking on product
5. Manufacturer (country of origin)

D815EEA2 and D815EPEA2 boards

D815EFV and D815EPFV boards

«
...
90
91
92
93
94
...
»

Summary of Contents for D815EEA2

































































































Reviews:

No comments

Related manuals for D815EEA2

Brand: Omnia Pages: 102

RocketLink-G 3088/I

Brand: Patton electronics Pages: 61

Brand: National Instruments Pages: 130

Brand: ZALMAN Pages: 11

TD-3316B4-16P-A1

Brand: TVT Digital Pages: 2

Brand: axing Pages: 52

Hotwire 8775 MSDSL

Brand: Paradyne Pages: 10

Brand: Lanner Pages: 38

Brand: Freescale Semiconductor Pages: 8

NVRx-7300 series

Brand: Swann Pages: 9

PFC Chokes PFC3515V Series

Brand: Delta Electronics Pages: 1

Brand: Echo Pages: 21

i.LON SmartServer

Brand: Echelon Pages: 34

Brand: EVGA Pages: 3

Brand: Kordis Pages: 31

Brand: MESA Electronic Pages: 27

Brand: Westermo Pages: 22

Brand: Paradyne Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands