Intel D815EEA2, Product Manual

Page: 45 / 96

Installing and Replacing Desktop Board Components
45
Replacing the Battery on the D815EEA2 and D815EPEA2 Boards
To replace the battery on the D815EEA2 and D815EPEA2 boards, follow these steps:
1. Observe the precautions in “Before You Begin” (see page 25).
2. Turn off all peripheral devices connected to the computer. Always turn off the power and
unplug the power cord from the computer before replacing the battery.
3. Remove the computer cover.
4. Locate the battery on the desktop board (see Figure 23).
5. With your fingernail or a medium flat-bladed screwdriver, gently pry the battery hold-down
latch back enough to free the battery from its socket.
6. Install the new battery in the socket, orienting the “+” as shown in Figure 23.
7. Replace the computer cover before reconnecting the computer.
OM11636
Figure 23. Removing the Battery from the D815EEA2 and D815EPEA2 Boards
✏
NOTE
If your local ordinances permit, you may dispose of individual batteries as normal trash. Do not
expose batteries to excessive heat or fire. Keep all batteries away from children.