background image

76

En

Random Playback

The Random function can only be set while the PLAY 
screen is displayed.
To play songs in random order, during playback (or while 
playback is paused or stopped), press 

Random

. All of the 

songs in the current folder will be played in random order. 
When all of the songs in the folder have been played once, 
they’ll all be played again in a different random order. To 
cancel random playback, press 

Random

 again.

Random playback supports up to 20000 songs per folder. 
If a folder contains more than this, songs over 20000 are 
not included in random playback.

Repeat Playback

The Repeat function can only be set while the PLAY 
screen is displayed.
To play songs repeatedly, during playback (or while play-
back is paused or stopped), press 

Repeat

 repeatedly to 

select: Repeat1, Repeat Folder, Repeat All, or Off.
In Repeat1 mode, the current song is played repeatedly.
In Repeat Folder mode, all of the songs in the current 
folder are played repeatedly.
In Repeat All mode, all of the songs on the current server 
are played repeatedly.
To cancel repeat playback, press 

Repeat

 repeatedly to 

select Off.

Note

• If the message “

No Item.

” appears, this means that no informa-

tion can be retrieved from the server. In this case, check your 
server, network, and AV receiver connections.

Windows Media Player 11 Setup

This section explains how to configure Windows Media 
Player 11 so that the AV receiver can play the music files 
stored on your computer.

Note

• Windows Media Player 11 can be downloaded for free from the 

Microsoft Web site.

4

Use 

q

/

w

 to select an item, and then press 

Enter

.

A list of music files appears.

5

Use 

q

/

w

 to select a music file, and press 

Enter

 or 

1

 to start playback.

Playback starts and the following screen appears.

• To return to the previous menu during playback, 

press 

Return

.

• To stop playback, press 

2

.

• To select the next song, press 

6

. To select the 

beginning of the current song, press 

7

. To select 

the previous song, press 

7

 twice.

• To pause playback, press 

3

. To fast forward the 

current song, press 

4

. To fast reverse the current 

song, press 

5

.

Tip

• If you press 

Display

, you can toggle between the play-

back screen and the list screen.

Note

• For some sort of media server, Fast Forward/Fast 

Reverse/Pause operations do not work.

All Music

Song 1

1 / 10

Song 2
Song 3
My favorite song 1
My favorite song 2
My favorite song 3
My favorite song 4
My favorite song 5
My favorite song 6
My favorite song 7

My favorite song 1

My favorite song 1

Artist name

My favorite album

4 / 10

MP3 128kbps 44.1kHz

0:00:00

ALL

1

Start Windows Media Player 11.

2

On the Library menu, select Media Sharing.

The Media Sharing dialog box appears.

3

Select the Share my media check box, and then 
click OK.

4

Select the AV receiver in the list, and then click 
Allow.

5

Click OK to close the dialog box.

This completes the Windows Media Player 11 con-
figuration.
You can now play the music files in your Windows 
Media Player 11 library through the AV receiver 
(

75

).

Summary of Contents for DTR-70.2





























































































































Reviews: