Integra DTR-70.2, Instruction Manual

Page: 23 / 124

23
En
■
“Monitor Out” setting set to “Analog”
Video input signals flow through the AV receiver as
shown, with composite video, S-Video and PC IN (Analog
RGB) sources being upconverted for the component video
output.
Use this setting if you connect the AV receiver’s
COMPONENT VIDEO MONITOR OUT to your TV.
Composite video is upconverted to S-Video and S-Video
is downconverted to composite video. Note that these con-
versions only apply to the
MONITOR OUT V and S out-
puts, not the VCR/DVR OUT V and S outputs.
The composite video, S-Video and component video out-
puts pass through their respective input signals as they are.
This signal flow also applies when the “
Resolution ” set-
ting is set to “ Through ” (
➔
51 ).
Video Signal Flow and the Resolution Setting
When the “ Monitor Out ” setting is set to “ Analog ”
(
➔
50
), if the “ Resolution ” setting is set to anything
other than “ Through ” (
➔
51
), the video signal flow will
be as shown here, with composite video, PC IN (Analog
RGB) and S-Video sources being upconverted for the
component video output.
The composite video, S-Video and component video
outputs pass through their respective analog input sig-
nals as they are. HDMI input signals are not output.
Audio Connection Formats
Audio component can be connected by using any of the
following audio connection formats: analog, analog multi-
channel, optical, coaxial, or HDMI.
When choosing a connection format, bear in mind that the
AV receiver does not convert digital input signals for ana-
log line outputs and vice versa. For example, audio signals
connected to an optical or coaxial digital input are not out-
put by the analog
VCR/DVR OUT .
If signals are present at more than one input, the inputs
will be selected automatically in the following order of pri-
ority: HDMI, digital, analog.
IN
MONITOR OUT
* 1
Blu-ray Disc/DVD player, etc.
AV receiver
TV, projector, etc.
Composite
Composite
S-Video
Component
Video Signal Flow Chart
HDMI
HDMI
*1
For details, refer to “Video Resolution
Chart” (
➔
121 ).
S-Video Component PC IN
(Analog RGB)
IN
MONITOR OUT
AV receiver
TV, projector, etc.
Blu-ray Disc/DVD player, etc.
Composite
Composite S-Video
Component
Video Signal Flow Chart
HDMI
HDMI S-Video Component
PC IN
(Analog RGB)
IN
OUT
* 1 * 2
*
1 * 1
*
1
*
3
*
1
*
3
Blu-ray Disc/DVD player, etc.
AV receiver
TV, projector, etc.
HDMI Coaxial Analog
Audio Signal Flow Chart
HDMI Analog
Multichannel
*1
Depends on the “ Audio TV Out ” setting (
➔
67
).
*2 This setting is available when “ Audio Return Channel ”
setting is set to “ Auto ” (
➔
68 ). You must select the TV/CD
input selector and your TV must support ARC function.
*3 Only the front L/R channels are output.
Optical