Integra DTR-70.2, Instruction Manual

Page: 66 / 124

66
En
Main menu Miscellaneous
Volume Setup
■
Volume Display
`
Absolute :
Display range is “ Min ”, “ 0.5 ” through “ 99.5 ”,
“ Max ”.
`
Relative(THX) :
Display range is “ –
Q
dB ”, “ –81.5dB ” through
“ +18.0dB ”.
With this setting, you can choose how the volume level is
displayed.
The absolute value 82 is equivalent to the relative value
0 dB.
■
Muting Level
`
–
Q
dB (fully muted), –50dB to –10dB in 10 dB steps.
This setting determines how much the output is muted
when the muting function is used (
➔
26
).
■
Maximum Volume
`
Off , 50 to 99 (Absolute display)
`
Off , –32dB to +17dB (Relative display)
With this setting, you can limit the maximum volume.
To disable this setting, select “
Off ”.
■
Power On Volume
`
Last , Min , 1 to 99 or Max (Absolute display)
`
Last , –
Q
dB , –81dB to +18dB (Relative display)
With this preference, you can specify the volume set-
ting to be used each time the AV receiver is turned
on.
To use the same volume level that was used when the AV
receiver was turned off, select “
Last ”.
The “ Power On Volume ” cannot be set higher than the
“ Maximum Volume ” setting.
■
Headphone Level
`
–12dB to 0dB to +12dB
With this preference, you can specify the headphone vol-
ume relative to the main volume. This is useful if there’s a
volume difference between your speakers and your head-
phones.
OSD Setup
■
On Screen Display
This preference determines whether operation details
are displayed on-screen when an AV receiver function is
adjusted.
`
On :
Displayed.
`
Off :
Not displayed.
Even when “ On ” is selected, operation details may not be
output if the input source is connected to an HDMI IN .
■
TV Format (Australian models)
For the on-screen setup menus to display properly, you
must specify the TV system used in your area.
`
Auto :
Select this to automatically detect the TV system
from the video input signals.
`
NTSC :
Select this if the TV system in your area is NTSC.
`
PAL :
Select this if the TV system in your area is PAL.
■
Language
`
English , Deutsch, Français, Español, Italiano,
Nederlands, Svenska, 中文
This setting determines the language used for the
on-screen setup menus.
12V Trigger A/B/C Setup
See “Using the 12V Triggers” (
➔
89 ).
Miscellaneous