Integra DTR-70.2, Instruction Manual

Page: 87 / 124

87
En
■
Zone 2 Power On Volume,
Zone 3 Power On Volume,
Zone 4 Power On Volume
`
Last , Min , 1 to 99 or Max (Absolute display)
`
Last , –
Q
dB , –81dB to +18dB (Relative display)
This setting determines what the volume will be for
Zone 2/3/4 each time the AV receiver is turned on.
To use the same volume level as when the AV receiver was
last turned off, select “
Last ”.
The “ Zone 2 Power On Volume ”, “ Zone 3 Power On
Volume ” and “ Zone 4 Power On Volume ” cannot be set
higher than the “ Zone 2 Maximum Volume ”, “ Zone 3
Maximum Volume ” and “ Zone 4 Maximum Volume ”
setting.
■
Zone 2 Component Out
`
Use :
Select if a TV in Zone 2 is connected the COMPO-
NENT VIDEO ZONE 2 OUT .
`
Not Use :
Select if no TV in Zone 2 is connected the
COMPO-
NENT VIDEO ZONE 2 OUT
.
If you’ve connected the COMPONENT VIDEO ZONE 2
OUT to a TV in Zone 2, this setting is set to “ Use ”.
Note
If the “ Zone 2 Component Out ” setting is set to “ Not
Use ”, the same video signal as COMPONENT VIDEO
MONITOR OUT is output from ZONE 2 OUT (compo-
nent).
This section explains how to turn Zone 2/3/4 on and off,
how to select an input source for Zone 2/3/4, and how to
adjust the volume for Zone 2/3/4.
Controlling Zone 2/3/4 from the AV receiver
Note
• When Zone 2/3/4 is turned off, the output from the 12V TRIG-
GER OUT goes low (0 volts).
Using Zone 2/3/4
1
To turn on Zone 2/3/4 and select an input source,
press
Zone 2 , Zone 3 or Zone 4 followed by an
input selector button within 8 seconds.
Zone 2/3/4 turns on, the
Zone 2/3/4
indicator lights.
Tip
• The 12V TRIGGER OUT goes high (+12 V).
To select AM or FM, press Tuner input selector and
Zone 2 , Zone 3 or Zone 4 repeatedly.
(North American models) You can also select SIR-
IUS.
To select the same source as that of the main room,
press
Zone 2 , Zone 3 or Zone 4 twice. “ Zone2
Selector: Source ”, “ Zone3 Selector: Source ” or
“ Zone4 Selector: Source ” appears on the display.
2
To turn off Zone 2/3/4, press
Off
for each Zone.
The zone is turned off, and the Zone 2 , Zone 3 or
Zone 4 indicator goes off.
Zone 3
Zone 2
Zone 4
Off
Zone 2 indicator
Zone 4 indicator
Input selector buttons
Zone 3 indicator