Integra DTR-70.2, Instruction Manual

Page: 28 / 124

28
En
When you connect an
u
-capable Onkyo component, you
must configure the input display so that
u
can work
properly.
This setting can be done only from the front panel.
Note
• DOCK can be selected for the Tape , Game or VCR/DVR input
selector, but not at the same time.
• Enter the appropriate remote control code before using the
remote controller for the first time (
➔
96 ).
Note
• Always turn down the volume before connecting your head-
phones.
• While the headphones plug is inserted in the Phones jack, the
Headphone indicator, speaker/channel indicator FL and FR
lights. (The Powered Zone 2/3/4 speakers are not turned off.)
• When you connect a pair of headphones, the listening mode is
set to Stereo, unless it’s already set to Stereo, Mono or Direct.
• Only the Stereo, Direct and Mono listening modes can be used
with headphones.
You can use Activities to execute a number of remote
control operations with a single button.
This button has the following two modes.
`
Easy Macro mode:
You can turn on and off the AV receiver, playback
components and TV.
`
Normal Macro mode:
You can assign desired operations (
➔
101
,
103
).
Note
• If you set any one of the Activities to Normal Macro mode, all
the Activities will be set to Normal Macro mode.
• To use
Activities
, first assign the remote control codes of the
AV components you are using (
➔
98 ).
Starting Components Using Activities
*1
Depending on the start-up time of the playback component,
the AV receiver may not be able to activate the playback com-
mand. In this case, press 1 on the remote controller.
Changing the Input Display
1
Press
Tape
,
Game
or
VCR/DVR
so that “TAPE”,
“GAME” or “VCR/DVR” appears on the display.
2
Press and hold down Tape , Game or VCR/DVR
(about 3 seconds) to change the input display.
Repeat this step to select “ MD ”, “ CDR ” or
“ DOCK ”.
For the Tape input selector, the input display
changes in this order:
For the Game input selector, the setting changes in
this order:
For the VCR/DVR input selector, the setting
changes in this order:
Using Headphones
Connect a pair of stereo headphones with a stan-
dard plug (1/4 inch or 6.3 mm) to the
Phones
jack.
TAPE
→
MD
→
CDR
DOCK
→
→
GAME
↔
DOCK
VCR/DVR
↔
DOCK
Using Activities to Start Easy Macros
Press My Movie , My TV , or My Music .
At purchase, Activities are set to Easy Macro mode
as the default setting.
The default actions are described below.
My Movie
:
1. The TV turns on.
2. The playback component assigned to
BD/DVD
of Remote Mode turns on.
3. The AV receiver turns on.
4. The input selector of the AV receiver is set to
BD/DVD .
5. Playback begins on the playback component
assigned to BD/DVD .
*1
My TV :
1. The TV turns on.
2. The playback component assigned to
CBL/SAT
of
Remote Mode
turns on.
3. The AV receiver turns on.
4. The input selector of the AV receiver is set to
CBL/SAT .
My Music :
1. The playback component assigned to TV/CD of
Remote Mode turns on.
2. The AV receiver turns on.
3. The input selector of the AV receiver is set to
TV/CD .
4. Playback begins on playback component
assigned to TV/CD . *1
Note
• After pressing one of the Activities , you cannot use other
Activities until the assigned actions have been com-
pleted.
• If you wish to use another of the Activities after starting,
press All Off and then press the desired Activities .