b. Attach the Front Decorative Cover (19) onto the front of the Main Frame (1) with 2pcs Bolts
(M5xp0.8x50mm)(101).
c.
Paste a Logo Sticker on the surface of the Front Decorating Upright Cover (19). A logo sticker is
included in one of the hardware boxes.
STEP 6: Pivoting Arm Cover Assembly
a.
Attach the Left-Rear Pivoting Arm Cover (49) and Right-Rear Pivoting Arm Cover (50) and secure
with 4pcs Bolts (M5xp0.8x15mm)(100).
b. Attach the Left-Middle Pivoting Arm Cover (51) onto the Right-Middle Pivoting Arm (52) and secure
with 4pcs Bolts (M5xp0.8x15mm)(100).
c.
Repeat the above same procedure on the left side.
NOTE: Make sure the bolts are fully tightened before moving to the next step.
11
