STEP 7: Console Bracket and Console Fixed Bracket Assembly
CAUTION:
Be careful not to damage the Middle Pulse Sensor Wire (135) while assembling STEP 7.
a.
Slide the Console Bracket (43) onto the Front & Back Upright Cover (61, 62) as the FIG1 illustration
shows above.
NOTE: The Bolt, Button Head (M8xp1.25x12mm) (143) and Lock Washer (M8) (88) are pre-attached
on the Upright Post (4.)
b. Remove the Bolt, Button Head (M8xp1.25x12mm) (143) and Lock Washer (M8) (88) from the Upright
Post (4.)
c.
Attach the Console Fixed Bracket (139) onto the Upright Post (4) and secure with the Bolt, Button
Head (M8xp1.25x12mm) (143) and Lock Washer (M8) (88).
STEP 8: Wire and Stationary Handlebar Assembly
NOTE: The Bolt, Button Head (M8xp1.25x16mm) (110) and Lock Washer (M8) (88) are pre-attached on the
Stationary Handlebar (5).
a.
Remove the Bolt, Button Head (M8xp1.25x16mm) (110) and Lock Washer (M8) (88) from the
Stationary Handlebar (5).
b. Connect the Middle Pulse Sensor Wire (135) and the Lower Pulse Sensor Wire (136) to the Stationary
Handlebar (5).
c.
Refer to the inset drawing. Insert the Stationary Handlebar (5) into the Upright Post (4) and secure with
the Bolt, Button Head (M8xp1.25x16mm) (110) and Lock Washer (M8) (88).
CAUTION: Be careful not to damage the Wires (135, 136) while assembling Stationary Handlebar (5).
12
