To reset the function value to zero, press the “RESET” button.
h. START/PAUSE” button: To start a workout, press the “START/PAUSE” button.
WITHOUT PULSE VALUE:
“
” flashing symbol will appear when detecting your pulse.
THE WARNING BEEP SOUND EMIT CONSTANLY DURING WORKOUT:
If your pulse is greater than the SELECTED PULSE VALUE during workout, the short
warning beep sound will constantly emit.
Please note that this is a warning for you to slow down or to decrease the workload level.
P12 (WATT CONTROL) UNDER PROGRAM MODE
The console is equipped with LEVEL CONTROL and WATT CONTROL function. During Program 12 under
PROGRAM mode, the WATT CONTROL function is available to operate.
Before operating P12, review the difference between the CONSTANT POWER and the CONSTANT TORQUE
function:
Level Control (Constant Torque)
Watt Control (Constant Power)
“RPM
RESISTANCE ---
Unchangeable resistance even though the value of
RPM (Rotate Per Minute) increases or decreases under
the Constant Torque Mode during workout.
No matter how fast you pedal, the resistance is fixed.
Changeable resistance depends on the value of RPM
(Rotate Per Minute.)
“RPM
RESISTANCE
; RPM
RESISTANCE
”
In order to remain the value of Watt Control, the
value of the RPM (Rotate Per Minute) increases
(when you pedal faster), while the value of the
Resistance decrease (becomes lighter resistance.)
On the contrary, the value of the Resistance would
increase (becomes heavier resistance) when the value
of the RPM decreases (when you pedal slower.)
a.
START/PAUSE” button: Press the “START/PAUSE” button to pause the current program.
b. “RESET” button: Hold the “RESET” button for FOUR SECONDS to enter into the initial setting mode
as the illustration shown below.
The RESET function only operates under PAUSE MODE
.
c.
“PROGRAM” button: MANUAL would then flash on the LCD window. Press the “PROGRAM”
button to select “PROGRAM MODE”.
25
