TIME (01:00 to 99:00; 1minute increment)
DISTANCE (0.1 to 99.9km; 0.1km increment)
CALORIES (10 to 990 Kcal; 10 Kcal Increment)
PULSE (70 to 240 BPM; 1BPM increment)
Press the “ENTER” button to confirm the function value and enter the next function value
setting.
Press the “UP” or “DOWN” button to select the value of the function (“TIME”,
“DISTANCE”, “CALORIES”, “PULSE”)
To reset the function value to zero, press the “RESET” button.
j.
START/PAUSE” button: To start a workout, press the “START/PAUSE” button.
WITHOUT PULSE VALUE:
“
” flashing symbol will appear when detecting your pulse.
THE WARNING BEEP SOUND EMIT CONSTANLY DURING WORKOUT:
If your pulse is greater than the SELECTED PULSE VALUE during workout, the short
warning beep sound will constantly emit.
Please note that this is a warning for you to slow down or to decrease the workload level.
OVERVIEW SETTING VALUES:
Display Readout
Display range
Storage
Zeroing
Description and small tip
“TIME”
0:00 to 99:00
Yes
(During a
workout. The
selected value
will turn to zero
after turning
off)
Yes
(Use “RESET”
button)
1. Time will count up to 99:00 and
cycle run the program profile without
setting.
2. Time will count down to 0
depends on desired time value users
set up. Two short beep sound for
warning the selected value reach to
zero.
“DISTANCE”
0.0 to 99.9km
Yes
(During a
workout. The
selected value
will turn to zero
after turning
off)
Yes
(Use “RESET”
button)
1. Distance will count up to 99:90km
and cycle run the program profile
without setting.
2. Distance will count down to 0
depends on desired distance value
users set up. Two short beep sound
for warning selected value reach to
zero.
“CALORIES”
10 to 990 Kcal
Yes
(During a
workout. The
selected value
will turn to zero
after turning
off)
Yes
(Use “RESET”
button)
1. Calories will count up to 990 Kcal
and cycle run the program profile
without setting.
2. Calories will count down to 10
depends on desired calories value
users set up. Two short beep sound
for warning selected value reach to
zero.
“PULSE”
70 to 240 BPM
Yes
(During a
workout. The
selected value
Yes
(Use “RESET”
button)
1. CONSOLE WITHOUT PULSE
VALUE:
“
” flashing symbol will appear
21
