To reset the function value to zero, press the “RESET” button.
i.
To start a workout, press the “START/PAUSE” button.
Under PAUSE or START mode, the user could press the “UP” or “DOWN” button to adjust workload
level.
WITHOUT PULSE VALUE:
“
” flashing symbol will appear when detecting your pulse.
THE WARNING BEEP SOUND EMIT CONSTANLY DURING WORKOUT:
If your pulse is greater than the SELECTED PULSE VALUE during workout, the short
warning beep sound will constantly emit.
Please note that this is a warning for you to slow down or to decrease the workload level.
TARGET H.R. MODE
There are three ways to enter into TARGET H.R. MODE as below:
1. POWER OFF STATUS (LCD diagram disappear on LCD window):
a.
Pedaling to activate the console.
b. The activated LCD console lights up along with a long beep sound. LCD diagram appears as shown
below:
c.
Enter into the initial setting mode after around two seconds as shown below:
2. RESTART FUNCTION:
a.
Press the “START/PAUSE” button to pause the current program.
b. Hold the “RESET” button for FOUR SECONDS to enter into the initial setting mode as illustration
shown below.
29
