FUNCTION BUTTONS
PROGRAM/MODE
: Press the button to select the desired mode – “MANUAL”, “PROGRAM”,
“USER”, “TARGET H.R.” as shown:
Press the “ENTER” to confirm and enter the function value setting.
ENTER:
The button is equipped with TWO operating methods.
a.
Press the button to confirm and enter the selected mode (“MANUAL”, “PROGRAM”, “USER”,
“TARGET H.R.”).
b. Press to select the function value displays of “TIME”, “DISTANCE”, “CALORIES”, “PULSE”,
“AGE”.
Use the “UP” or “DOWN” button to increase or decrease the desired function values of “TIME”,
“DISTANCE”, “CALORIES”, “PULSE”, “AGE”.
QUICK START, START/PAUSE:
The button is equipped with THREE operating methods.
a.
QUICK START: Press the button to enter into “MANUAL MODE” immediately without selecting the
function value displays of “TIME”, “DISTANCE”, “CALORIES”, “PULSE” .
b. START/PAUSE button:
1. Press to start a workout.
2. Press to pause the program.
The console would display the current function values of workload level, “TIME”,
“DISTANCE” , “CALORIES” , “PULSE” .
3. User can press the “START/PAUSE” button again to continue to run the current program.
NOTE:
All of the function values of “TIME”, “DISTANCE”, “CALORIES”, “PULSE” in the
memory would turn to initial function values the console was set up after turning off or
switching to another mode (“MANUAL”, “PROGRAM”, “USER”, “TARGET H.R.”).
RESET:
The button is equipped with TWO operating methods.
a.
ZEROING FUNCTION: Press the button to reset each function value to zero during setting.
The RESET function only operates under PAUSE MODE
.
b. CHANGE SELECTED MODE – “MANUAL”, “PROGRAM”, “USER”, “TARGET H.R.”:
Under PAUSE MODE, Hold the button for FOUR SECONDS to enter into the initial setting mode as
shown.
18
