b. Attach 4pcs Levelers (75) to the Front Stabilizer (2) and the Rear Stabilizer (3).
c.
Be sure to tighten the Levelers (75) securely against the Stabilizers (2, 3) until screw lines are
eliminated as the drawing 1 shown above.
d. In order to assemble the Stabilizer (2, 3) smoothly, it is suggested to place one Styrofoam (or any
stationary object) under one side of the Main Frame (1).
e.
Attach the Front Stabilizer (2) onto the Main Frame (1) and secure with 2pcs Washers (8x38x2.0t)(92),
2pcs Lock Washers (M8)(88) and 2pcs Bolts (M8Xp1.25x65mm)(113).
f.
Attach the Rear Stabilizer (3) onto the Main Frame (1) and secure with 2pcs Washers (8x38x2.0t)(92),
2pcs Lock Washers (M8)(88) and 2pcs Bolts (M8Xp1.25x65mm)(113).
NOTE: If the item is not level, review the LEVELING to level the Levelers (75).
LEVELING: After placing the equipment in the intended location for use, check the stability of the equipment. If
the equipment is not level, reviewing the following direction: Loosen the Leveler (75) to make the Adjustment
Plate become less tight. Adjust the Leveler (75) for leveling. Tighten the Adjustment Plate securely against the
Stabilizer to lock the Leveler (75) in stable position as the drawing 2 shown.
STEP 2: Upright Sleeve and Wire Assembly
CAUTION: Be careful not to damage the Wires (131, 132) while assembling Step 2 to 3.
9
