STEP 11: Console and Console Bracket Assembly
a.
Place the Console (41) onto the Upright Post (4) and secure with the Screw, Round Head
(M5xp0.8x15mm) (100).
b. Attach the Console Lower Case (39) to the Console (41) under the Stationary Handlebar (5) and secure
with the Screw, Round Head (M5xp0.8x15mm) (100).
c.
Slide the Console Bracket (43) onto the Console (41) and secure with the Screw, Round Head
(M5xp0.8x15mm) (100).
STEP 12: Accessory Tray Assembly
NOTE: The Screw, Round Head (M5xp0.8x15mm) (100) are pre-attached on the Upright Post (4). Remove the
Screw, Round Head (M5xp0.8x15mm) (100) from the Upright Post (4).
Attach the Accessory Tray (37) onto the Upright Post (4) and secure with the Screw, Round Head
(M5xp0.8x15mm) (100).
STEP 13: Upper Handlebar Assembly
NOTE: 8pcs Bolts (M8xp1.25x16mm)(142) are pre-attached on the Left and Right Pivoting Arm (8, 9).
a.
Remove 8 pcs Bolts (M8xp1.25x16mm) (142) from the Left and Right Pivoting Arm (8,9).
b. Following the assembly drawing, insert the Right Upper Handlebar (7) onto the Right Pivoting Arm (9)
and secure with 4pcs Bolts (M8xp1.25x16mm)(142).
c.
Repeat the above procedure on the left side.
STEP 14: Rotator Cuff-Pivoting Arm Assembly
a.
Place the Front Rotator Cuff-Pivoting Arm (46) and the Back Rotator Cuff-Pivoting Arm (47) over the
Right Pivoting Arm (9).
14
